Question about Maytag Parts Washing Machines
...end of cycle. My washer is 2 years old now. It still washes fine with no leaks. At the end of the cycle in stops with a loud bang and it appears to have moved a little bit. I don't think it would ...
banging during spin cycle to me washers are a mystery so I really have no idea where to even begin. anyway, beginning yesterday evening we did some laundry and during the spin cycle there was a slight
washer is making thumping-knocking noises at the end of the spin cycle which are very loud. I checked and the machine is level. It does this even without cloths in the drum. I removed the agitator and
...washer goes to spin it makes a very lot of clicking and loud banging noise and also it makes most all of the lights in the house pulse... it seems to wash the clothes and it does end up spinning just ...
banging and shaking would indicate it is out of balanced. If the washer consistently bangs and shakes in spin then I's suggest you remove the spin basket and check under it for obstructions that might
Question about Whirlpool Washing Machines
washer bangs very loudly on the spinning cycle when i tipped it over and looked underneath it there is a triangular braket not connected to any thing what do i do with this bracket or is that even the
Question about Whirlpool Washing Machines
...end on my maytag neptune washer machine I have about .5 to 1 gallon of water at the end i try extra extract and it does not work. If you are spinning them on the highest setting try to put it on ...
Question about Washing Machines
...washer 110.20912 991 made banging noise at end of spin cycle. Now it wont spin at all. Having trouble with my waher. A couple weeks ago it started making a horrible thumping noise at the end of the ...
...BANGING NOISE AT THE END OF SPIN CYCLES. WHEN IT IS SPINNING SLOWER, NO PROBLEM. IT IS NOT A PROBLEM OF BEING LEVEL. Hi, When my washer did that, I found that the shocks that hold the tub were bad... ...
Question about Samsung Washing Machines
...end of the rinsing cycle. Then when it starts spinning it starts banging against the wall and moving aggressively. We have now tried all spinning modes (high, mid low and no spin) and it seems to ...
2,460 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
1,413 Questions
1,373 Questions
429 Questions