Whirlpool Ultimate Care II LSQ9549L Top Load Washer "stuck spin" Questions

...spin. I think there maybe something stuck. Water not completely empty after spin It could be two problems. Check the hot and cold water inlet valves, it should be completely close at the final ...

stuck on the rinse/spin position The initial wash cycle is fine, but when it gets to the "Rinse/Spin" cycle, it stays there and continues rinsing and spinning forever. I tried to advance to the "Spin"

...stuck in the spin cycle my washer is stuck in the spin cycle. the washer is off and it keeps flashing spin hi this might be too obvious but did you try to unplug the washer for at least 5 min to ...

...spin cycle gets stuck and water keeps running, have to shut water off and power down to go into separate spin/rinse cycle to finish. Why? Water solenoid stuck ... water level sensor clogged with ...

...spin in place. Stuck on a cord or rug: The robotic vacuum cleaner may be stuck on a cord or rug and spinning in place as it tries to free itself. Mechanical problem: The vacuum cleaner may have a ...

...spin or drain Sounds like something is stuck in the drain pump.  If nothing is stuck in the pump replace the pump.  It won't spin until it drains, so fixing the drain problem will fix the ...

...stuck in "spin" and wont do anything. Will drain when put on drain cycle, and will fill and rinse. Just stopped spinning and gets stuck there doing nothing. is the door lock lit make sure the door is ...

...spin and remove the water. it makes a low humming noise when it gets stuck. I am wondering if I can just replace the mechanism. or do I have to check and clean the valves, etc. thanks in advance tot ...

...spin cycle. Help! How do I correct this problem quickly and easily? Not sure what you mean by stuck on spin cycle. If it will not stop spinning, then timer or control most likely would need