...washer drain line. If the washer is full of water, make sure that the washer drain is clear and working properly. Check the drain hose for kinks or clogs. If you find no problems with these issues, I ...
Question about Washing Machines
...washer won't drain the pump belt might havebroken or might have worn ... It will fill with water but won't spin or drain on its own. ... Keep in mind that any water in the washer will pour out of the ...
...washer drain. You may need to manually unlock the washer door and then pull the large item filter on the pump to check for a clog. To manually unlock the washer door, unplug the washer to disconnect ...
Question about Whirlpool Washing Machines
...washer drain line. If the washer is full of water, make sure that the washer drain is clear and working properly. Check the drain hose for kinks or clogs. If you find no problems with these issues, I ...
...the pump, then you could have a clog in this area. If the washer does drain normally, then you could have a failed pressure switch, air pressure hose problem, wiring failure or a failed control
Question about Whirlpool Washing Machines
...drain the washer and spin out the clothes using a RINSE/DRAIN & SPIN cycle. Make sure that you are using HE (High Efficiency) detergent in the appropriate amounts to prevent excessive suds in the ...
...washer drain. You may need to manually unlock the washer door and then pull the large item filter on the pump to check for a clog. To manually unlock the washer door, Always saftey unplug the washer ...
Question about Washing Machines
...washer's drain system, and you must troubleshoot the problem to determine how to fix the washer and clear the code. F/02 error code potential causes Check the drain hose and make sure it is not ...
...2 options: Either do some plumbing and change out to a larger drain pipe, or set up a laundry sink off to the side that the washer can drain into, and then can drain out at it's own
...washer drain to make sure that it is draining properly. Check the drain hose for kinks and clogs. Make sure that it is installed properly per the instructions in your owner's manual. An improperly ...
2,460 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
1,413 Questions
1,373 Questions
429 Questions