...apart just follow these steps: 1. Remove the auger center cap/dispenser by either pulling straight up or gently placing a flat blade screwdriver into a slot located in the cap. 2. If the agitator is ...
...washer does not agitate well. The spin cycle is fine. It is a dual action agitator and the bottom half seems to work ok, but the top part seems to do nothing. I found an agitator repair kit on ...
...washer is a split design. The upper portion is called the auger, the bottom is the agitator. It comes apart by followng these simple steps: 1. Remove the center cap on the auger by either pulling ...
...apart? Hi 1. Remove the 'auger'( upper portion) center cap/dispenser by either pulling straight up or gently placing a flat blade screwdriver into a slot located in the cap. 2. If the 'agitator'( ...
Question about Whirlpool Washing Machines
...auger from the agitator. Any suggestions. When you look down into the agitator, are there 4 white plastic points that look slightly melted or otherwise deformed? If so, using a small flat head screw ...
...washer's drain that is always getting plugged. For the longest time I could not figure out why. I have tried to take it apart and auger the lines to make sure that nothing was blocked. Have you tried ...
...apart and you need assistance in how the parts go back together, refer to searspartsdirect.com for some helpful exploded view diagrams under the "Agitator, Basket and Tub" parts section. If you have ...
...washer the bottom part of the agitator moves but the top part does not. My wife thinks it the clutch part (part no 387091) but I thought I'd ask before I try and take it apart or find replacement ...
Question about Whirlpool Washing Machines
...apart you have to hold the bottom down and pull real hard to seperate the 2 peices. But if you want my advice I wouldn't They are normally noisy machines. If this is a Whirlpool washer, the agitators ...
Question about Kenmore Washing Machines
...apart. it looks like there is a white plastic washer being held down by some plastic clips that prevents the top auger part of the agitator from coming off the bottom half. what am I missing? Usually ...
2,460 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
1,413 Questions
1,373 Questions
429 Questions
