Whirlpool LHW0050PQ Front Load Washer "clothes damp washing machine finishes" Questions

...washing machine how to remove? Hi, the best way is to try and get a damp cloth and i use the end of a wooden spoon with the cloth to remove as much as i can. Then if and when you finish doing that i ...

damp clothes to the dryer or clothes line. Turn on the water supply only when you want to use the machine. This works for me because I don't do many loads per week and my laundry area is right next to

...clothes came out slighly damp at first so repeated a drying cycle. When the drying cycle had finished for a second time, the clothes instead of dry were soaking wet!! The washing machine fills with ...

washing machine with a damp cloth or sponge. Don't forget to clean the control panel, knobs, and any other surfaces. By following these steps, you should be able to thoroughly clean your Kenmore Elite

...clothes and spinning the water out. last night after a complaint from the misses, i opened the door and there was a fine misty smoke. it smelled faintly of neoprene (best descpition i have) and damp. ...

...clothes are quite often more damp than when we started when wwe tumkble dry them. Please help! try checking the filture on the front at the bottom of the machine they some times get full of muck Hi, ...

...clothes seem to be not spun properly and still fairly damp when the cycle is finished. they used to be fairly dry before try cleaning your filter in washing machine,if this dosent fix problem,sounds ...

...Clothes will always be wet after a wash but if you are saying that they are soaking wet rather than just damp from a frontloadre like yours then you may have an obstruction in the pump system.. That ...

damp Hotpoint WF541p We have the above model that will work as normal but when spinning has finished, still leaves clothes wet (very heavy but not dripping) Some water is still left inda machine. Also

...clothes are wet rather than damp.if i turn dial to spin cycle only it works that way.please advise. If you have not already done so, then check and clean the pump filter, this is usually located at ...