Amana Acd12ke-e Window Air Conditioner "unit conditioners plug" Questions

...out but dont unplug wiring. Cut Firth wire out from the center on the touch pad six wire plug. Cap both ends and plug back in. now unit will run on high cool and turn it on and off by plug and ...

...your air conditioner voltages are the same, they have to be, your unit will need service either way but hopefully the latter which is cheaper, and call a licensed electrician to check out that plug. ...

unit worked perfectly when plugged in at the work station. Emerson Quiet Kool: 12NW46HK-A V: 230/208 Hz: 60 Hi1 Do you have at least 200 volts at your outlet? Check that first. You said you brought it

...after that push the C button of remote control if C display at the unit then off the unit and plug out the power supply. Then plug in again and "on" the unit using the remote control. no remote ...

...plug can I use for this air conditioner! My whole house is 110 or 220 If it is a 110 unit,use a regular wall receptacle ,if it is a 220 unit,use a 220 receptacle for 220 it will be made larger and ...

unit. Plug unit back in. Wait until unit beeps (about 5 seconds) then release On/Off button. Unplug unit. Plug unit back in. You're good to go. http://www.fixya.com/support/p102574-sharp_af_s120fx_air

...outlet is fine, cord seems fine. Unit will not turn on either with remote or by pressing button on unit. Most newer air conditioners have a ground fault plug. Press the button on the side of the

...unit. Somehow the entire plug ewas pulled out from the inside. Its a 3 prong and i have hooked the ground wire back up but unsure where the other 2 wires go. any suggestions actually 3prong plugs ...

...plug". The unit was working last night but this morning I wanted to drain the unit by following the instructions so I moved the unit sideways to connect the drain hose and pushed the power button on ...

...plug for wall unit You probably have a 230 volt AC that uses a different plug. If you insist on using unit there you will need an electrician to run the correct wiring and install the correct female ...