Question about Keurig Coffee Makers & Espresso Machines
...exit needle, how can I check? Do you have this part to insert the k-cup into? There has to be an exit needle and this part has the exit needle inside of it. ...
Question about Keurig Coffee Makers & Espresso Machines
...exit needle, swirl to dislodge debris (clog could be preventing H2O uptake). Do this for all three of the holes in the exit needle. Add distilled white vinegar to reservoir. Run "Brew" without a KCup ...
where is the Exit needle Hi,The exit needle is on the bottom of the K-cup holder...it pokes the bottom hole in the K-cup...heatman101
...exit needle could be clogged located( inside bottom of the holder assembly). Remove K-cup assembly and detach funnel. Insert a paper clip or simiilar tool into the exit needle to loosen the clog and ...
Question about Keurig Coffee Makers & Espresso Machines
exit needle and/or the entire K-Cup holder assembly. To do this, remove and disassemble the assembly. The parts are dishwasher safe (top rack) or can be cleaned fairly easily by hand. In addition, use
Question about Keurig Coffee Makers & Espresso Machines
...exit needle WAS clogged..I cleared out coffee grounds from the exit needle (it'll have to be cleared out more than once) but after three or four times of cleaning it out with a paperclip and shutting ...
Question about Keurig Coffee Makers & Espresso Machines
...exit needle and no signs of scale. Used needle to clean but no effect on stream. Is the exit puncture hole supposed to be smaller than top hole? Water stream with no k cup is solid throughout cycle. ...
...k-cups and it does not make a difference. It sounds like your exit needle is clogged. Take a paperclip, unfold it, and run it through the exit needle to get out the grounds that are clogging
...exit needle The exit needle is located on the inside bottom of the K-Cup Holder. If coffee grounds or cocoa mix gets clogged in the exit needle, it can be cleaned using a paper clip or similar tool. ...
...exit needle is blocked. Take a small paperclip and carefully insert upward into exit needle, swirl to dislodge debri. Do this for all three of the holes in the exit needle. Run "Brew" without a KCup ...
465 questions posted
Usually answered in minutes!
1,392 Questions
801 Questions
725 Questions
453 Questions
296 Questions