...465 oven. When I start the oven, the temperature is there, the timer starts the pre-heat, but the oven does not ignite. change the oven ignitor, that's the electric pilot nest to the oven
...oven! Press Cancel/Off key to start a latch reset, wait 20-30 seconds and open door, or turn the power off at the circuit breaker or fuse box for one minute, then turn the power back on. If the oven ...
...oven attemps to start. The temp guage starts at 75 degrees as usual but just stays there and the oven stays cold. The broil feature works fine, the rest of the range works fine. There is no problem ...
oven slow to start heating Oven slow to start heating (sometimes) not always. But once the gas burners ignite then the oven heats up quickly Hi, The ignitor is not working right and is going bad.... ...
...Start/On. Then the oven will display Pre as it re-heats. When the thermostat indicates the desired temperature is reached, the oven will beep. The racks should be on the middle positions for most ...
Oven heats up but will start beeping with F3 error or will just shut off. It did not start doing this till the broiler element busted inside while hot. Could this have done something? F3 or F4 Open or
Oven element started to spark Whirlpool Range Model RS386PXB, oven element started to spark, the element had one spot that appeared it was being welded together, a sharp bright light. I shut the oven ...
Question about Kitchen Ranges
...oven does not start, it appears the firing element does not start and there is no gas coming out either. Gas oven. Oven is 17 years old. get in a gas fitter to replace the burner and clean out the ...
oven on" and the "preheat" indicator lights start blinking. follow this test and fix it. God bless you Oven Igniter As the oven igniter weakens over time, it will take longer for the gas valve to open
Question about GE Kitchen Ranges
...Start and Clear are the only keys that work. F7 S6, S7, SA, d6 Oven keeps generating F7 error and scrolls through ether S or 5 6,7,A and d6 on the lcd panel. Cannot lock or unlock using 9+0. Have ...
67 questions posted
Usually answered in minutes!
179 Questions
87 Questions
81 Questions
70 Questions
69 Questions