...stove top burner cartridge Jennair SVE47600W How do I take apart the top of the stove so that I can replace the outlet that the stove top burner cartridge plugs into? Also, what is the P/N for this ...
Question about Kitchen Ranges
...stove top Westinghouse pon663' ive piggybacked stove top to oven but the stove top is not getting as hot as it should I shouldn't be like this, but what the hell are you doing messing around with ...
stove top and my burned made a loud pop noise but continued to work Usually it's the electrical wire in the back that touched the metal part of the stove and made a short. Check the back of your stove
...stove top that burned out the element and connector for it. I replaced the heating element and connector. Everything is working now, but I still get a constant red light indicating that the stove ...
Question about GE Kitchen Ranges
...stove top of my hotpoint electric stove to clean under the burners and now I can not get it back in place There are two metal brackets, thin ones, like little wires, one on each side, holding the ...
...stove top this morning and it worked fine. We went back to use the oven and it did not work. I went to try the stove top again and it did not work. I noticed the clock was out so I assumed we tripped ...
...top stove electrical short I have a spectra flat top stove and while removing the bottom heating element, I pulled the wires and caused some type of short in the stove. Now the entire stove is kaput. ...
Question about Viking Kitchen Ranges
...stove that old. The wiring schematic is on the back of mine. You might also find it in the control unit at the top. You don't say what the wiring repair is, but I have replaced elements in the oven, ...
Question about GE Kitchen Ranges
...reconnect things, light is coming on but the cook top stove got hot for short while then nothing. none of them are getting hot anymore. what the issue. asking Live wire may have fried control
stove top burner replacement we have a glass top GE stove and had to replace a 6" burner but it still won't work and the surface unit light stays lit any ideas? if your sure you have it wired ...
126 questions posted
Usually answered in minutes!
179 Questions
81 Questions
70 Questions
69 Questions
55 Questions