Whirlpool GS460 Gas Kitchen Range "oven doesnt light right" Questions

...oven is turned on for more than 10 minutes. The top burners work. It is a Whirlpool model # SF315PEMB1 see if your broiler works if it does replace the bootom ignighter even though it glowes does not ...

oven stopped working, the ignitor GLOWS and OPENS the valve, gas comes OUT, but doesn't light. What's wrong? the fact that gas comes out means that the ignitor opens the valve, what other part shall I

oven burner doesnt light right i have kenmore elite gas range the oven burner wont light correctly i've taken it apart and watched it the ignitor glows red but the gas valve doesnt open if i tap on it

...doesnt ignite. What is going on? I miss my oven! Hello, That piece that glows (the ignitor) is weak and needs to be replaced ,to order that part you need the model nuber and a lot of times it is on a ...

...oven doesnt work. the top burners work just fine but the oven will not light. i checked the gas shutoff valve to make sure it wasnt closed.what should i check next?? pls help. when i set bake 300 on ...

...oven is broken,and also so it doesnt start automatically by it self please rate this solution thanks This is exactly right, when your control shows PF, this is not a fault mode but only indication ...

...oven burner doesnt kick in. the igniter glows red hot but the gas never flows out. I looked at the bottom back to trace where the gas comes from. I found a rectangular metal box that has both ...

...oven, the first is located on the rear of the unit behind the panel ( if standing behind unit its in the upper left hand side of unit. 2 wires leading to the thermostat and a small "button" to press ...

doesnt work everything else does Hello, The bake setting stopped working the other day. I opened oven to see that bake element was melted mostly on right (if looking into oven) 2/3 of unit. I replaced

...oven bulb in jer8885qas i cannot find the wire retainer, does not seem to be one. can not remove the glass lens to replace bulb. can you help me out with this? I hope this may help you if it doesnt ...