...water filter led turned red after it had been green and remained lit on red even when not filtering. tried removing and replacing water filter but the led is still on and still red constantly ...
...filter with clean water and allow to COMPLETELY air dry. Removed the glass plate by depressing the lever behind the glass plate, and gently pulling it out. Clean the glass with a half water, half ...
Question about PUR Air Purifiers
...water filter I've been unable to get the the filter to come apart so that I can change the filter. Now, when I'm trying to get filtered water almost no water comes out. Please help! Thanks! When mine ...
water. Just remove the filter from the back of the unit. You will find an Ozone sensor above the fuse. Carefully remove it and put the unit on MANUAL mode and the service light will go out. It was put
Question about Sharper Image Air Purifiers
...light show!) Here are things found by others to cause the arching and what they did to fix the problem: --dirt, lint, or tiny hairs stuck somewhere (usually towards the top or bottom of the plates or ...
Question about Air Air Purifiers
...filter the metallic bars that look like the bottom of a DVD are statically connecting creating the pop noise a shaking or rattling noise means it probably wet. I got a trick use a microfiber towel to ...
...water are dry before reinstalling into the air purifier. DO NOT place a wet or damp collection cell in the air purifier 4. Snap off the charcoal odor absorber from the back of the cell. Change as ...
...filter has been put back in. I have the same problem and haven't been able to fix it. However, others have had the same problem and have posted their solutions. The sizzling sound is caused by ...
Question about Spectre Air Purifiers
...light came on, engine died and will not restart as above. Could there be a water or oil pump failure causing the slow start. Battery tested ok. refill the battery with electrolyt and charge it fully, ...
...Turn off the unit. Thern, Rermove the pre-filter & gently clean with soap & water, rinse well. Finally, dry & replace back into unit. Then turn back on unit & the light should be
31 questions posted
Usually answered in minutes!
271 Questions
141 Questions
164 Questions
134 Questions