Dayton (4LX41) Heater "used wrench remove daytons" Questions

...remove the thermocouple. Wait one minute and reinstall it using your fingers to tighten as much as possible. Then using an appropriately sized, open end wrench tighten it ONLY 1/4 turn more. That ...

remove the entire pilot assembly from the gas valve to the burner mount and blow out with an air compressor. The orifices inside the pilot are so tiny, you cannot generate enough pressure blowing with

...remove those then slide the entire assembly out of the unit. Loosen, with a small Allen wrench, the little screw holding the motor shaft to the squirrel cage. The motor is held to the assembly with a ...

...remove the pilot assembly and take it to an air compressor to totally clean the pilot orifice. You'll need a 3/8 and a 7/16 wrench at the gas valve to disconnect the pilot tube and the thermocouple. ...