Honeywell (F50F1032) Air Purifier "ionizing wire" Questions

Ionizer wires get dirty I wash and clean cell each month. In between cleanings, the ionizer wires get dirty and I have to wipe the clean to stop popping. Shouldn't the dirt particles gather on

...I installed the green light flashed and then went off. removed the cabinet and saw that one of the ionizing wires was broken (the loop at the end was snapped). I removed all the ionizing wires and ...

How do I clean the ionizer when the check filter light turns on? with no power to the unit take a soft moist cloth and wipe easy all the wires are flat plates

...points with fine steel wool as well and both cells are clean. You should also try rubbing the ionizing wires with 600 grit finishing paper first.  If that does not work, you can purchase ...

...other type of non ferrous wire. Until we find the right wire, we cannot repair them to last. Any assistance in locating the correct type of wire for use in ionizing air cleaners would be

how to get replacement parts for Sharper Image ionizer? Need the fine wires I have the ionic breeze quadra and one of the fine wires in the unit snapped. Does anyone know if it an be replaced and ...

Ionic Breeze Silent Air Purifier GP The blue lights are blinking on my air purifier, is there something wrong with it? and can it be fixed? Ionic Breeze products are no longer being supported because ...

...about those little plastic tabs at the bottom, they aren't important. Their job is to wipe the ionizing wires when you take the grid out or replace it. Hoping the answer is correct and it seems ...

ionizing wires. Clean them. It's hard. I took mine apart and used steel wool. Most likely the ionizer wire broke. We tried replacing the wire with guitar wire, as stated on this website. It burned out

...ionizing wires and where can I purchase such a wire? I have replaced those wires with chrome plated wire, stainless steel wires and platinum wires. Nothing lasts very long (weeks to a few months). ...