Kenmore Elite 22.4 cu. ft. Bottom Freezer Refrigerator with Adjusta Cube Ice Maker "fan not" Questions

fan is not spinning. Does the fan always spin or only when called for??? HELP HELP Hi, If the compressor...the black can in the back...is running then the fan should be running... if it is not running

...fan blower not working and water dispenser not working. both problems happened at same time when i open door fan is not blowing in air to the frig and its not cooling sufficently. i think this is a ...

Fan not spinning The fan on the inside of the cooler is running, but the fan on the back of the unit is not. The cooler is not cooling. Is this due to power supply failure or something else? Thank you

...fan. it should not be tight to turn. it should spin freely. if it is hard to turn, its probably stuck, which is why its not spinning. Remove grill, slide the nottom portiom out so you have access to ...

...fan is not running. It's underneath. You access it from the back behind the cardboard cover. The fan should run when the compressor runs. Replace the fan and you can stop using the house fan. Yes, ...

...fan is not working, so I hooked up a fan and is helping some but not enough, what can I do. Thank you, Ronald Fiegel Is this a Dometic unit? I really need a good model number if this is not a Dometic ...

...FAN NOT WORKING CONDENSOR FAN NOT WORKING AFTER REPLACING PCB BOARD. Was the motherboard replaced because the temp was too high? May be the condenser fan was at fault all the time. Check you have ...

not try to oil up the fan as it will smell kinda funny in the refrigerator and it will fail again quite soon. They are not to expensive and can be bought from the appliance repair parts store. I would

fan not running and some items in freezer appear to be thawing recently pulled refrigerator away from wall to clean / paint wall. When restored to original position, heard clinking from compressor fan

...fan not working? condenser fan not running fan is free. relay on the main board on back clicking in and out instantly when clicking in fan tries to start .is there a overload in the fan? the cabinets ...