...GP has no power at all, you may need to slide one or both of the grills upward just a hair. You should hear and feel a slight click when the grills are properly locked into place. Buy a new one and ...
Question about Sharper Image Air Purifiers
...GP. Unit powers on, goes to Attention Required & then switches to Drying Grid for about 30 min. Then goes back to Attention Required & motor shuts off. If I power off & back on again, it ...
...power. Can you help I posted a solution to a similar problem I had with my Ionic Breeze GP. I was able to replace a bad switch and get the unit working again. Details are in the following Fixya ...
GP Professional Series My air cleaner simply quit working after I cleaned and reinstalled the stainless inserts. No lights, nothing. Any idea? Make sure the grids are in correctly. It will not receive
...GP professional Series" no pwer My ionic breeze unit will not power up. I have changed the bulb and checked the covers; which are both on. The lights do not come on. Thank you for responding. I ...
Question about Sharper Image Air Purifiers
...GP (SI830) dead, will not power on. Do I need to replace the lamp or something else? SharperImage is in bankruptcy and has no information for warranty or post warranty support. sharper image has a ...
Question about Sharper Image Air Purifiers
...GP Germicidal Air Purifier SI724 NO POWER I just sold a working Sharper Image Hybrid GP Germicidal Air Purifier SI724 on eBay. Now the buyer is telling me it will not power on. Any known issues with ...
...gp units and two of them have now failed. It would appear that there is simply no power going to the on/off switch and I'm kind of hoping somebody can suggest a testing and repair sequence so that I ...
Question about Sharper Image Air Purifiers
GP Professional Series Ionic Breeze - Simply Quit Working Unit made a 'popping noise' and will not come on at any setting. Grid seated, not dirty and ultraviolet bulb looks good continuity checks 'OK'
...GP will not power on. One of the earlier posters recommended one to remove the rear grill & clean the "wires". I removed the 4 screws that holds the grill to the body, but still cannot remove the ...
151 questions posted
Usually answered in minutes!
164 Questions
113 Questions
44 Questions
22 Questions