Kenmore 24.5 cu. ft. Side-by-Side Refrigerator with PUR Ultimate II Water Filtration "freezer door bulge" Questions

...door LFX25960? How to reset display panel that reads error message: Er IF To reset is to repair, this error message it telling you that your Ice Fan is probably not running which is contained in the ...

...door LFX25960? How to reset display panel that reads error message: Er IF To reset is to repair, this error message it telling you that your Ice Fan is probably not running which is contained in the ...

freezer is running good & doing its job. He said the only problem I have is with the door gasket which doesn't seal properly. I ordered another one & installed it but that one also didn't seal

freezer door there are three racks from the bottom of the door up. Just above the third rack there is a bulge in the door where the ice chute is and the motor is at the bottom of that bulge looking up

...freezer side and close the door, that in itself will push the refrigerator door open. Is it because the magnet inside the rubber gasket around the door are no longer strong or what? It shouldn't be ...

...door. Help! What causes this and how can we fix it? The fridge still cools well and the freezer side is not affected. Hi, Check out these tips...they can help you figure out whats going wrong with ...

freezer and cold food temps If you could look around the door panel for a model number, Example:106.48062890 I may be able to help you solve the problem. Causes could be defrost timer, defrost element

...freezer works fine. i cleaned all the dust from the back and motor area. also it leaks in the front by the door, if you could help me with this problem or direct me into the right direction to ...

...freezer door seals or door not closing. fridge gets cooled from freezer. not so common, control board, compressor. control board may have bad capacitors (bulging) compressor may be better to replace ...

...freezer compartment is not cold enough for long term storage and all of them build up ice. however, check door seals carefully as you may have an air leak past them. "4" is a reasonable setting and ...