...remove the battery, and place a piece of thin wire across the the two contacts of the HANDSET. I am referring to the contacts inside the handset that connect to the battery, NOT the contacts on the ...
...remove each handset, one at a time, from the system to see if we could determine if any of them were defective and maybe the cause of our problems. We took handset #1 and removed its battery. We ...
...Battery". Find handset works by causing the handset, or handsets to beep when you push the button on the base unit, and until you find the handset and push the off button. If the handsets do not beep ...
...battery, remove 2 screws under battery, carefully open handset casing by prying open with thin bladed screwdriver, remove pc board by removing 3 retaining screws, on opposite side of pc you will see ...
...Remove the battery and check the contacts inside the handset and the battery as well. Next replace the battery pack. If you add a comment with your phone's model number, then I can try to find the ...
...identification remains valid. If you remove the battery or drain the handset to a point where the handset ID is lost, then you may have to re-cradle the handset in the base unit to reestablish
Question about Uniden Lands Phones
...REMOVE THE BATTERY COVER TO REGISTER THE TCX905 WITH THE TRU8866 and everything works fine.... Just removed the battery cover and it worked. Thank you!!! I biught a TRU9496 base which was packaged ...
...Remove battery 2. Hold down the * and # buttons and reinsert battery. You should hear a long beep. If not retry. (This is a bit awkward but hold the handset upside down and it's workable) 3. Screen ...
...handset. Wanted to check the battery, so removed it and placed in base handset. That stopped working; so removed that battery and put the original back in the base handset. NEITHER phones work now! I ...
426 questions posted
Usually answered in minutes!
607 Questions
454 Questions
320 Questions
147 Questions
81 Questions