NEC Electra Professional ETW-16DC-2 "co lines" Questions

...CO connected lines! Can I program the system to start searching from botom (CO#1) to top? Thanks a lot in advance! Sergio No. C.O. Line group access is always from high to low. However, you can turn ...

CO lines if you want to have several outside calls going on at once. I Have 3 CO lines and 8 extension, when I received calls, alll the telephones rings, how does it configure to received call only in

We are using the Panasonic KX-T7453 phone. We transferred our original CO line down to another division of our company. Now when we hit SP-Phone to dial out we get a dead line. How do I program the ...

CO lines has been moved to a different location. However, when we pick up the phone to dial out we still automatically go to the dead line. How do I completely remove that line? disconnect the line in

...programming by the same method. Press program button then any programmable button and it will be identified in the LCD screen. The CO lines may be 2 digit if you have an older system as in 01, 02, ...

CO 02. If it doesn't dial 0 01 STORE and 0 02 STORE in those buttons. In a TD system, the lines have to appear in order for you to use them. They don't have to be 1:1, but it's the easiest. (there's a

...lines and pressing PROGRAM, a CO button on the left side of the phone and dialing 0x STORE sets the line on the telephone. There are also some access and ringing programs that need to be done in ...

Programing outside (CO) line button how can i program the outside (CO) line button in KX-T77730 press program button then press the flexible where you want program the CO line then press 0, here u can

...CO lines 3 and 4 to be accessed by extensions; 101, 102, 103... and CO line 2 to be accessed by extensions: 104, 105, 106, 107. CO line 1 needs to be dedicated to a particular extension; More than ...

How to make CO button back to its default on KX-T7730 ? By default i use CO-1 to connect to line call, but i learned to do auto dial and accidentally replace the CO-1 for number stored. can i reset it