DISH Network IR Remote Control "stop tv timing" Questions

remote has power but has stopped controlling the tv , the tv rebooted, since the the remote can't do any of the functions also the volume on the cable remote stopped working at the same time beattery ...

...TV turns off. Each time you press the POWER key, the LED blinks, and the next code in the list is sent. This process continues until all of the codes in the Code Lists have been tried. If your ...

tv does not use either play or stop commands,in most universal remote u need to set the apropriate code for the tv set so u can use volum,chanells and other tv specific commands. In order to do that u

...003 = press FF 3 times. 021 = press PLAY 2 times, then press FF 1 time Press STOP. Try Channel Up -- if TV responds, you're done - if not, repeat process using the next number for your TV. Good

...Press power until the TV responds. My sleep timer displayed after 23 presses (hotel room Magnavox TV). Stop pressing remote. The red light will then flash a few times once you stop. Problem

...- point the remote away from the TV set and press any button or the SET button until the Power LED stops blinking 9. you are now ready to go Hello Setup codes for Nikkai TV with URC7740 remote ...

...TV turns off hit the STOP button at the bottom then hit the button you just programed then hit the ON/OFF button, the TV/DVD/VCR will turn on if it doesnt work, repeat. make sure you hit the stop ...

...On/off button will light up. Push on/off button until the tv turns off. up to 30 or so times Then push the stop button on the bottom of the remote tosave the config. please let me know if that ...

...search on the universal remote just press code search and then TV then press power on while you in tv front till the tv turn on, then stop! you can use it now but don't removed the battery at a

...TV turns off hit the STOP button at the bottom then hit the button you just programed then hit the ON/OFF button, the TV/DVD/VCR will turn on if it doesnt work, repeat. make sure you hit the stop ...