...turn your AV off. Sometimes the blinking starts because the drive is over 95% full and sometimes it means one of the drives inside is failing or has died.Run the WD Discover Tool, go into to ...
Drive not being detected I have 2 of these 120GB drives I use to back up a NAS, swapping the drives each week for redundancy. This happened once before and I used the backup power supply which fixed ...
...Turn the drive off -When pushing the power button to switch the drive ON, keep holding the power button until the blue LED of the power button starts to flicker and then release the button. -Then, ...
...NAS Source Code}, at the [botton of the page]. 3.Turn-off the computer. 4. Disconnect the Hard drive. 5. Restart the computer. 6. Install the Drivers. 7. Restart the computer again. 8. Connect the ...
...drive and could not connect it anymore. I've tryied to do a ping test, and worked ok, but still couldn't connect. The HipServ Agent neither sees it. So, I thought it had to do with the name that ...
...turn it on and the blue light on the top comes on, it hums as if trying to read and then a red light on top blinds, but my laptop can no longer see it and I can't get my photos off. I notified ...
39 questions posted
Usually answered in minutes!
154 Questions
141 Questions
128 Questions
107 Questions
79 Questions