...config)#ip address fo 192.168.1.1 255.255.255.0 !--- Assign an IP address. Failover Commands PIX(config)#failover ip address fo 192.168.1.2 !--- IP address for the failover link. PIX(config)#failover ...
...mode exec user Router) ping ip show ip route show version traceroute ip mode exec priveligiado show arp show interface show protcols show ip protocols show startup-config erase startup-config ...
Question about Cisco ASA Computers & Internet
...IP 192.168.10.0 and LAN2 with 10.200.14.0 I need static route to LAN2 with gateway on 192.168.10.2 i tried this command: ! configure an internal static route to reach network LAN2 ASA(config)# route ...
Question about Cisco ASA Computers & Internet
...config and IOS image to a tftp server. 2. Format flash (disk0) 3. set rommon server, ip addy, and file settings. 4. tftpdnld 5. Once the system has booted to the image copy the asa image file, asdm ...
...config file on your TFTP server 3. TFTP server should be reachable from ASA then asa#copy tftp flash give the tftp server ip address give the configuration file name (as exactly on the TFTP server) ...
Question about Cisco ASA Computers & Internet
...IP 4- if u want to put prepair config files to your gateway , you will need to type order #copy tftp run , then foloow the steps If u need anything else please let us know by leave your completely ...
...config terminal" and press enter to access configuration mode Type "configure factory-default" and press enter to load default settings. Assign a static IP to your PC of 192.168.1.5 and try to browse ...
config/ip> route/ rip/ address - address <ifname> <static/dynamic>[if static only:-><-ip <ipaddr>/<mask|bits>>] [-rip <enable/disable>] [if dynamic only:->
27 questions posted
Usually answered in minutes!
44 Questions
25 Questions
15 Questions
1 Questions