Durabrand W600 Shelf System "set clock" Questions

...set the clock, and no directions come with it. Is there a clock? I push the button "clock" and the digits flash 12: 01but nothing changes the numbers. Hi, Follow the procedure to set time/ clock. ...

...set clock:1.  Press "Timer/clock button".  The hour digit begins to flash.2.  Press (<< P.DOWN or >> P.UP) on the multicontrol to set Hours.3. Press SET button.  The ...

...set the clock whether the Unit is on or off. Note that the clock must be set, otherwise the timers cannot be set. 1. Press the SHIFT button. 2. Press the 1 CLOCK button. The ?CLOCK? indicator on the ...

...set the clock but after I get it set to were I want it to be it changes back to the setting 7:45. Can you tell me how to lock the time in. Carrie Press CLOCK...HRS flashes. Set HRS with left/right ...

set the clock? HelloTo set clock do the folloing:[1]  Press and hold 'clock' until the hour flashes on the display.[2]  Press 'digital tuning' << or >> to set the

...savings time, and I can't reset the clock. turn clock on Press the SET buttom (red Clock icon will come on) Use fast fwrd / fast Revs button to move clock forward or back Press the set button when ...

...set the clock with remote: 1 Switch on the power. 2 Press [CLOCK/TIMER] to select ?CLOCK?. Every time you press the button: 3 (within 7 seconds or so) Press [g/REW/3] or [4/FF/f] to set the time. 4 ...

...Clock Set" Button... Press it once. With the Hour blinking, press the "CD-Tuner-Skip" Up or Down Buttons to set hour. Press the "Clock Set" Button again to make the minute display blink. Adjust the ...

...to set the clock. Here is a link to the manual: http://www.docs.sony.com/release/MHCGX20.PDF The instructions for setting the clock are on page 10. You will need the remote in order to set the

...set clock Hi there, Follow below procedures to set the clock.. 1. Press CLOCK until the time flashes on the display (12-hour clock for RCA, 24-hour clock for Thomson). 2. Press TUNING UP or DOWN to ...