Margaritaville Frozen Concoction (DM1000) Blender "unscrew jar" Questions

...thorougly clean the jar you need access to remove the gasket, blade assembly, and jar base. It just unscrews CCW. If it has never been romoved it may be quite a task to get it loose. Do not loose the ...

unscrew the bottom of the glass jar to clean it. I don't have the part to unscrew the bottom to clean it. where can I buy one? If u cannot unscrew it is a problem. People normally twist anti clockwise

...Unscrew the glass jar from the bottom. Check to see if the grey seal is between the metal blade assembly and the glass jar. I had this issue and it turned out to be that a friend had reassembled the ...

I spilled 1/2 cup milk on the blender base through the bottom of the glass jar (the jar bottom came unscrewed). Now when I press a button the number on the button lights up but the motor doesn't spin.

...cleaning - food underneath cutter..does it screw off? Usually the ring on the bottom of the jar unscrews. There is a rubber gasket beween the jar and the bottom hub holding the cutters. Make sure ...

unscrew the collar from the bottom of the jar, and the old gasket and blade assembly will pop out - sometimes you have to peel the gasket apart from blender jar, but not always. -Tha Mp3 Doctor Do not

jar. You will need to unscrew the collar and fit a replacement blade. make sure the seal is replaced with the blade and the collar is screwed back securely. See this link for the parts of the blender.

...jar Unscrew the hex nut off the underside of the jar. Pull the whole blade assembly out from the inside of the jar. When putting a replacement blade assembly in, put it back in in the same order ...

how do i remove the blades to clean them ? The base should unscrew from the jar. Take careful note of the order that the pieces come out, and replace them in the reverse order. Best regards, --W/D--

...jar (to clean the blades) but it doesn't seem to screw off or bayonet-turn off like any other blender we've had. Now it leaks badly there, but still won't seem to budge Put it in hot water for a few ...