Whirlpool ET8WTKXK Top Freezer Refrigerator "amperage draw" Questions

Ad

Question about Refrigerators

1 Answer

...draw and seee what amperage its pulling, circuit breakers that have popped get worse for it each time too, may be that too now! check wiring, amperage and breakers ability to take normal amp draws, ...

Ad

...amperage draw and compare to normal specs. If high then the unit is overcharged (unlikely unless it has been worked on), there is a blockage in the cooling system causing the high pressure and high ...

Ad

Question about Fisher and Paykel Refrigerators

1 Answer

amperage draw under normal ambient conditions. If draw is equal to or slightly above rated spec the refrigerant level is ok. If amperage is low then the charge is lacking and the compressor works less

...help would be great. Howard Reynolds ARS in Cleveland Ohio. E-Mail: [email protected] First check the amperage reading just before it trips to know if it is drawing high amperage or if the breaker is ...

Question about Magic Chef Refrigerators

1 Answer

...draw of the unit in order to use it with your inverter . Here's why : the compressor in the refrigerator is rated with two amperage ratings . One is the running amps which is usually around five to ...

Question about Maytag Refrigerators

1 Answer

probably drawing high amperage and kicking out. the click and buzz is the compressor winding stressing to draw the energy needed. compressor maybe bad. the compressor model usually starts with a t11..

normal running amp draw for a compressor on a ARB2259CS ? This info should be listed on the model-serial number tag. It should be listed as "RLA" which stands for Running Load Amperage.

Question about Frigidaire Refrigerators

1 Answer

...and all door seals are good. compressor is running -- small line from compressor to condenser is hot. How do I find my problem and subsequent solution? Check amperage draw against nameplate

Question about Kenmore Refrigerators

1 Answer

...amperage, the overload takes it out then it cools down and tries again. the normal amp draw for those compressors is 3-4 amps. Have you checked the condenser fan and made sure the coil is clean? ...

Question about Maytag Refrigerators

1 Answer

...the RPM's of the new motor vs. the old. If you have a clamp meter, you can also do an amp draw to see what the amperage is and then check on the nameplate to see the correct amp draw off the

Not finding what you are looking for?
Whirlpool ET8WTKXK Top Freezer Refrigerator Logo

45 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Refrigerators Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...