...temp sensor. The temp sensor is mounted inside the oven cavity & regulates the oven set temperature. If the temp sensor fails the oven could overheat. This is what generates the error codes. I ...
...temp sensor failure notice. you will need to check the wires leading from the temp sensor to the control. if the wires are in good condition and , the sensor harness is not welded, replace the temp ...
...temp sensor. The temp sensor is mounted inside the oven cavity & regulates the oven set temperature. If the temp sensor fails the oven could overheat. This is what generates the error codes. I ...
...temp sensor failure notice. you will need to check the wires leading from the temp sensor to the control. if the wires are in good condition and , the sensor harness is not welded, replace the temp ...
Need to clean oven GE true temp self clean GE True temp self cleaning does not work F2 notice the oven temp sensor is bad. replace temp sensor to solve problem
...temp.,the oven will exceed set temp to 450' ++ Check oven sensor-- 10-11K ohms at room temp. Check wiring to sensor. If ok - replace electronic control. Affordable Appliance Repair Orange County, ...
...temp sensor or the oven temp. sensor itself is bad and should be replaced. To solve this issue test the oven temp. sensor, it should read between 1080-1120 ohms, if the rating is more then that and ...
Question about Samsung Kitchen Ranges
...immediately and continue throughout. When target temp is reached, it keeps on dropping and temp becomes very unstable. -possibly temperature sensor has bad connection. Or bad sensor. Good luck ...
...temp sensor is out of range, extreme high resistance. If you ohm it out it should read approx 1100 ohms at room temp. The other would be a welded bake relay on the board itself. Check the temp sensor ...
55 questions posted
Usually answered in minutes!
269 Questions
192 Questions
105 Questions
116 Questions
75 Questions
