...beeping. any ideas The following instructions are for the T289, which is very similar to the T250. It is possible they will work to turn off your beeps. Alert Tones The Alert Tones (beeps) on the ...
...1) Press and hold the key to turn the radio ON. 2) To change the volume level press the volume/monitor up or down key to increase or decrease the volume level. 3) Press and hold the key to turn ...
...allows you to listen for weak signals onthe current channel at the press of a key.To turn ON the Monitor Mode:• For brief listening, press MON button. The RXicon blinks.For brief listening, press ...
Question about BellSouth Radio Communications
How do I adjust squelch. Squelch is locked on I suspect you have it in the continuous monitor mode so follow the directions for getting back into the automatic squelch mode. AUTOMATIC SQUELCH: The FRS
...nothing It is possible you are not getting the radio into programming mode. Hold the PTT and the monitor button in, and while continuing to hold them in, turn on the radio. When you hear a series ...
third hand to accomplish. Start with the radio turned OFF. Hold the PTT (push-to-talk) and the MON (monitor) buttons in while turning on the radio. Continue to hold both buttons in until the series of
Question about Motorola Radio Communications
www.giantintl.com/RadioPDFs/Outdated%20Manuals/T280_User_Manual.pdfThe instructions say to hold the monitor button in while turning on the radio to turn the Alert Tones on/off.Best regards
Question about Motorola Radio Communications
...Monitor button on radio A. Turn radio A off and on to reset. NOTE: For MDC front covers (NTN5456, NTN5457, NTN5458, NTN5459, and NTN6009B), make sure that radio B is turned on before it is connected ...
Question about Motorola Radio Communications
...It coul be just a problem with "tones". I'm not familiar with that exact model but check for a "monitor" button. If you have one on the radio... press it down.... this should open up the squelch ...
...Entering Programming Mode Press and hold Push to Talk and Monitor for 3 seconds while turning the radio on. The radio beeps and displays PROG, the channel ...
10 questions posted
Usually answered in minutes!
165 Questions
90 Questions
92 Questions
70 Questions