...washer etc back together? which goes firstz/ Place glass container upside down on safe working area. Place rubber gasket/ring on top of opening first. Place stirring or mixing blade on top of rubber ...
...blade through the glass and use the white rubber gaskets against the glass and the stainless gaskets against the hardware. Then tighten the whole enchilada to the blender with the main nut (that goes ...
blade assembly through the bottom and locate the large washer. Peal it off carefully under warm water then either try to replace it or clean it carefully in soapy dish water. Let me know if this helps
...glass holder I'm no expert but in my experience if it leaking at the bottom then either the jar /carafe has a few chips or cracks around the hole in the bottom that the blade fits through and in that ...
...blade, washer and plastic screw on part. Please let me know how to get it. My blade assembly leaks just as you are describing. I found a website that offers replacement parts for Black and Decker ...
...blade, gaskets and washers for my glass waring blender jar. I put it together and it ran a bit but then tightened up and wouldn't work. It also started leaking, so I figured I'd put it together ...
...blade and bottom gear was too tight to turn by hand so the shaft was obviously gummed up. I did not video but this is pretty simple. Use a rag to reach into the glass pitcher and hold the blades from ...
30 questions posted
Usually answered in minutes!
13 Questions
13 Questions
9 Questions
7 Questions
6 Questions
