Dyna-Glo RMC-8001SS Heater "heat flame problems" Questions

The kozy wold heating stove flame has irruglar The kozy world heating stove flame has irruglar burning tips. it says it is not getting enough air but there is the adjustment to increase air flow! kozy

...hole if has one but that smost likely the reason for yellow flame not blue so its probably no problem carbon in heat exchanger will make heat transfer a bit slower so probably best to try and ...

...flame sensor on a 1993 Lennox Whisper Heat furnace. It heats,then the gas valve clicks and the flame briefly stops and starts again then the valve clicks again and the flame briefly stops and starts ...

flame, heated the screen around the burner to a cherry red. Worked great. Second time I used it the flames were yellow and huge. This is making a sooty mess on the deflector. It doesnt heat the screen

...flame seems to go back in the tubes behind the screens .is what they call flashback if so what is the problem and how can i fix it ? have you tried to heat up thermal couple for a couple of minutes. ...

flame inside the protection box where teh rollout sensors are, but the unit still works. Sounds like you may have a major issue. If the flames are not going into the heat exchanger there is a possible

...flame in heat tubes, then the flames go out. (see optional details) This is an intermittent problem that just started in the past few days. LED 1& 2 Slow flash. Not sure if its a wirig issue due ...

...heat exchanger heats up, so the flame will be on for a minute or two before the blower starts. it sounds like your blower is cooling down the heat exchanger too fast and causing it to shut off so it ...

...Sensor for Sit630 Eurosit model 0630535 I cant find just a flame sensor part which is what the heating guy said i need. Brings me to the hole mechanism. Which is the gas control valve. So is the ...

...heat, the inducer kicked on and it cycled fine, and its running now. What is stopping the sequence. Intermittently? Any ideas? thanks The flame sensor is not working properly, it is not allowing the ...