Dyna-Glo RMC-8001SS Heater "adjust pilot light heat" Questions

Ad

Question about Rta International Heating & Cooling

1 Answer

...(can be replaced) or the gas valve. If the pilot flame is not heating the end of the thermocouple you should be able to adjust its position so that the pilot flame is directed at it more ...

Ad

...adjust the pilot (see below). If there is an exploding sound when the burner ignites, adjust the pilot to a higher setting and clean the pilot orifice and the burner ports. If the burner takes more ...

Ad

...pilot light won't stay lit. The pilot lights normally, and fires when the thermostat calls for heat. But when it turns off the pilot goes out as well. We cleaned ou Pilot won't stay lit There's a ...

...adjust the pilot light flow on an old magic chef heating unit/ceiling mounted furnace? This is a ceiling mounted NG furnace. The flame is slow and straight up, so it does not even tough the ...

Question about Williams Heating & Cooling

1 Answer

...adjust the size of the pilot on my Williams gas wall heater? The are the words "Pilot adjustment" stamped on the exchange block but no screw only a little round blue plastic insert with a pin hole ...

...pilot light size. Is it small and not surrounding the top 1/3 of the thermocouple? If it isn't then the pilot orfice is restricted or the pilot tube compression nut could be loose. The pilot gas ...

Question about Procom Heating & Cooling

1 Answer

Is the regulator you have rated under 1/2 pound pressure? Try to throttle down the shutoff on the tank to see if pilot gets better. If so, you have a pressure issue. Gas you adjust the pilot gas valve

Question about Empire Heating & Cooling

1 Answer

Pilot light does not reach thermocouple We have a brand new Empire MV145 heater, the pilot light does not reach the thermocouple and does not stay lit when control knob is released. The service man ...

Question about Stoves Heating & Cooling

2 Answers

...generator, and are sure that's not the problem, then it may be the pilot solenoid on the main gas valve. How do you adjust a pilot light on a Gas Fireplace. The Pilot Light is at least 5 inches

Question about Coleman Heating & Cooling

1 Answer

...pilot light to come on but it will not stay on. I put a new thermocoupling in place. when I letgo go of the piolet light on the regulator the light goes off. Does this mean I don't have the ...

Not finding what you are looking for?
Dyna-Glo RMC-8001SS Heater Logo

112 questions posted

Ask a Question

Usually answered in minutes!

Top Dyna-Glo Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

john h

Level 3 Expert

29494 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Are you a Dyna-Glo Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...