Dayton (3E379) Heater "gas pilot" Questions

Ad

...gas to the pilot assembly. You can then turn on the gas supply and rotate the pilot knob to the pilot setting. Depress the knob into the gas valve. You should be able to smell and hear the gas come ...

Ad

Question about Williams Heating & Cooling

2 Answers

gas to the pilot through the gas valve. If you are not check to make sure you are getting gas to the gas valve from the main line. If you have a gas manometer you should be getting about 11 to 13 " of

Ad

Question about Cozy Heating & Cooling

1 Answer

...gas coming through the pilot supply gas line to the heater disconnect pilot line at gas valve if gas there then pilot line or pilot orifice is plugged clear with compressed air reconnect and try ...

Question about Dyna-Glo Heating & Cooling

1 Answer

...Remove pilot tubing from gas valve and push the pilot knob to verify gas makes it out of the valve. If not, bad gas valve, if you do get gas, replace pilot orifice located in pilot

Question about Rinnai Heating & Cooling

4 Answers

...pilot gas line from BOTTOM (beneath the unit). Pull it down so you can see top. 3. Turn gas back on and push in pilot button.. does gas come out? If so, then you're pilot is plugged with dust or ...

Question about Dayton Heating & Cooling

1 Answer

...gas valve control to pilot,depress pilot button and light pilot. Hold pilot button down for about 2 mins.Tip of thermocouple should be cherry red. If it'snot try to reposition so thermocouple is more ...

Question about Heating & Cooling

2 Answers

...pilot gas supply. when operating normally the millivolt generator keeps a small electromagnet pulled in that keeps the pilot gas supply open. if it don't work the pilot gas supply valve closes. ...

...gas or no pilot ignition? The blower turns on, for about 1 minute, then turns off again. There is no pilot visibly lit, and doesn't seem to be any gas. I have checked gas valves to confirm gas is on. ...

Question about Rinnai Heating & Cooling

1 Answer

...pilot gas button and no gas coming out of the line. Yes the gas is turned on and will come out of the connection prior to the heater. Removing the pilot tube. Remove the pilot assembly. Blow through ...

Question about Cozy Heating & Cooling

1 Answer

...Pilot light has no gas coming out, verified gas going into gas valve, but no gas coming out when pilot light button depressed. Pilot orifice may be clogged. Remove pilot tube and orifice. Blow out ...

Not finding what you are looking for?
Dayton (3E379) Heater Logo

60 questions posted

Ask a Question

Usually answered in minutes!

Top Dayton Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Dayton Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...