...whirlpool WFS 1273 AW front loader that gets stuck in the spin cycle. The timer counts down from 18 minutes to 17 minutes and starts to spin but before it gets to full speed the control panel lights ...
light flashes and the machine will do no more. The problem seems to occur just prior to the point at which the water should enter the machine. Thanks in advance The cycle doesn't advanceWhen the cycle
Question about Ariston Technologies Washing Machines
...light flashes door open stopping the cycle going any further please can any one help. hi, The cycle doesn't advance When the cycle doesn't advance, it's probably the timer or a cold-water supply ...
...light doesnt come on which means the wash wont start,but the timer still counts down,i have had the door interlock out and tried doing it manually ,i can hear a clicking but still nothing.i also ...
...light starts flashing. Unable to do a wash, I have checked the filter and it is clear. Sounds like the front door switch has come out of place, or the actuator is out of place. If you can take the ...
timer light keeps flashing The timer light keeps flashing. The motor is running, but the drum is not spinning. The door is locked. The other lights are on steady, except the timer light that keeps ...
Question about Washing Machines
light. GW709AU not competing rinse cycle and then beeps and flashes lights. Will not reset after 60 secs. After over night it runs for one wash only and then on second wash it stays at rinse and tries
...timer knob light a clock straight up being at 12 oclock an one click at 1oclock to enter the test first rotate knob to any postion except postion 6 staight down press start and fs button at same time ...
Question about Whirlpool Washing Machines
...light flashes. Must turn to STOP, wait 2 minutes, turnoff machine, turn back on and then restart on a rinse cycle. Otherwise everything seems to work OK including drain pump. What could be preventing ...
Question about Ariston Technologies Washing Machines
...is water in the tub and the timer light is flashing. I cannot, however, get the machine to resume the cycle. What should I do? unplug, let sit for 2 min, replug and try to put into drain/spin ...
23 questions posted
Usually answered in minutes!
139 Questions
50 Questions
40 Questions
42 Questions
24 Questions