...large center nut holding the burner assembly in place. The ignitor will slide out of the assembly once it is removed. Good luck I have a Jenn-Air Expressions cvgx2423b model. One of the knobs fro the ...
...burner cap and port rings. you will see a large brass nut that needs to be removed on all 4 or 5 burners. next you would need to remove the nut in the center of the simmer port ring which is also the ...
...burner. Look down that small hole and you should see a bronze orifice, it is pretty small, about 1/8" in diameter on the outside, looks like a nut. Most likely you will see grease or charred bits on ...
burner assembly. Once you remove all brass nuts. they will be about three inches long, then the main top should lift up. You can do this while unit is installed. Look for a blue, or black, or possibly
Question about Jenn-Air Cooktops
...large burner (bottom left), all igniters continue to spark. All other burners function correctly. This condition happens when other burners are on or off. I have removed the burner and cleaned it ...
Question about GE Cooktops
...burner valves for any obstruction such as spillage or cleaner residues. You can replace the regulator with any brand that has a 1/2" in/out pipe thread. Most are available at a large hardware
6 questions posted
Usually answered in minutes!
30 Questions
19 Questions
31 Questions
12 Questions
2 Questions
