Gem Sound DJ-2100 Turntable "connect" Questions

I get an intermittent loud hum using NAD AV316 amplifier, with stereo speakers(B connection) with phono input from Dual 606 turntable. Hum increases/changes when tone arm on turntable is touched. Have

what do i do with the earth cable on my technics to stop the humming? If you are connecting it directly to a HiFi amplifier, connect the ground lead of the technics to the ground termination on the ...

hum when turntable connected to phono sockets on amp amp has a gnd connection no lead from turntable to connect it to this turntable absolutely came with a ground wire that must connect to the gnd ...

my amplifer does not have a pre in connection what can I use to substitute You can use any spare connection, such as tape, aux, CD. However you will have to purchase a magnetic cartridge pre-amp, ...

SONY TURNTABLE PSLX22 VOLUME IS VERY LOW You have to make sure your unit is connected to the PHONO INPUT connection on your receiver. If your receiver does not have a PHONO INPUT connection, then you ...

connected to computer getting a lot of static during background music Could be caused by a bad earth connection or loose connection to the cartridge. Check the cable connection to the computer, they ...

How can i connect my Gemini Turntable which has a ground cable connection to a device that does not have a ground cable connection? Hi, slip the ground cable in the side of the rca connection to the ...

When connected to Denon 2808ci receiver i get humming noise.Since there is no ground wire to connect,how do get rid of the hum? Sometimes the earth lead in the power cord can be the cause, either ...

Connect a phonograph turntable to a receiver w/o phono connection How should I connect a phonograph turntable to a digital receiver without a Phono connection? I tried connecting to the Aux In. The ...