...installed a new deck now when the power comes Iget a pop sound from the sub. This is caused because the stereo you have put in, is a high power output, or higher than the factory and puts that extra ...
stereo, the shop (or person) whom installed the amp and subs used a line out converter. What this part does is allows the connection of RCA cables to the factory head unit. Almost all bass signals are
...installed a new sub (kenwood-xw1000f) into my truck i have it hooked up to a kenwood kac-428s amp(200watt) i bridge the amp now when i powered the system up the sub worked for 10 sec then quit i ...
...stereo, it sounds like the blue/white wire is not hooked up correctly. This powers up the car's amplifier and lets the sound through. i support thesoundman! My sub is not working i bought a new amp ...
stereo speaker outputs down to less than 3 watts. If your amp has high power inputs you can use those. If your amp does not have a built-in crossover then you will need to install a low-pass crossover
...installed 4 channel amp with front and rear door speakers and a sub but cant get it to sound good Car stereo is not easy. It takes a lot of experience and work to get it right. Keep working at it and ...
Question about Kicker Car Audio & Video
installed the system myself. I have a kenwood stereo, dub 550w mosfet amp, 4 sony tweeters and 1 10" mtx sub. They all worked at one time but the past few days either they worked or didnt and now they
Question about Sony Car Audio & Video
...stereo shop just installed 4 sony 6.5" 320w speakers, and a sony 12" 500w sub, with an sony 500w amp. there's a lot of bass, and treble, but not much in between. song's with no bass sound doesn't ...
Question about Rockford Fosgate Car Audio & Video
...even after buying a new, seperate wiring harness. i have previously checked the sub and amp, both are working but i still get no sound out of the sub. any answers?? Take it to a local stereo ...
...stereo system...EVERYTHING :::::::::::::::MAIN QUESTION::::::::::::::::: Anyway, I'm wondering if this configuration will work: *18 gauge wire for connection (yea, I know, but it was cheaper than ...
1 questions posted
Usually answered in minutes!