Mitsubishi WD-Y57 57" Projection HDTV "flashing orange light tv" Questions

...status light blinks red 5 times then orange 7 times replaced lamp now when i turn tv on i get stastus light 5 red flashes then 7 orange flashes if it is a 7 then u must replace. SOURCE: i am a ...

...tried resetting again and the blue hd light will just flash and the status light continually flashe orange any suggestions ? I happened the same problem and the solution must change the power ...

...I started to take the lamp out and now the indicator light is flashing orange. The "LAMP" LED light indicator is on or flashing.The tv projection lamp life are ended.Tv require a new projection

...the lamp light is blinking orange if the lamp light is flashing and the tv won't come on you need to replace the lamp. check your owners manual for how to do it or call mitsubishi customer ...

...in my wd 62327 and my lamp light is orange,status light is flashing orange, and will not turn on. Any idea's? These tv's have a lot of problems. The first thing is the power supply, 6 bad

...flashing orange, what can be the problem now? We already tried doing the same thing 3x!! The lamp door or air vent doors are most likely not closed correctly as those doors will make the lights blink ...

...orange light is flashing. it says status. Hi,did you close everything up,make sure door cover is closed.Do you hear clicking noises? If you do it could be an issue with the the ballast that the board ...

...flashing yellow/orange. I tried unplugging for over an over, hit the reset button but after this the timer light flashes green for a little bit and stops then the lamp light starts flashing again as ...

Orange, and screen go's off, and the LAMP light starts flashing, in a few min, the LAMP light go's off and the TV go's off, leaving the Orange STATUS light on HELP! :o( When was the Lamp last replaced

We just installed a new lamp and now the orange light is flashing on the front of the TV, what do we need to do? Ballast Board- visit online Encompass Parts Distr.type in model # or Call ...