Fellowes Manufacturing FEL36055 Powershred Shredder Bags for Model 380 2 50 Bags and TiesCarton "replace power switch" Questions

...replace it, if you can find new switch.2. solder two wire to switch and make a hole on top of unit. when you need to power unit, turn back switch on and touch two wire as switch. contact ...

...itself be bad ? If not that any suggestions. Also when you move the motor forward/feed rotation it moves freely and every thing works jsut no power. Thanks Ed. you have to replace the main power ...

...replace it. Problem is power switch- top of unit.After remove all screws- good luck, you need LONG-LONG screwdriver and one short screwdriver with out handler, because few screws almost imposable to ...

broken switch on royal ag15x Switch is broken and wont let power through to the shredder. Where can i buy a replacement switch? Thanks try radio shack or a electronics store

...power surge from jammming has burnt the contacts together on the switch....now the switch will not open to turn off...you will not be able to find a replacement switch, parts are not available for ...

...you have power from the wall. Open machine and test power ON/OFF switch. Check for any obvious blown fuses. If shredder has a pcb in it...it is most likely the culprit and would have to be

...make or model...its hard to be exact..but...generally unless there is an obvios reset switch, if you have no power or lights then its possible the pcb inside is "fried" and would have to be

...power off; remove top from bottom bin; remove all paper which you can see coming out of the cutter blades. Usually just pulling on these will work. Once it looks clear, replace top section onto bin, ...

I have a fellows 420 cc power shredder that will not start when paper is inserted if ther are no red warning lights lit, then you will have to replace the auto feed senors or the main power switch.

...switch and it works perfectly. My Achiever CCS 5000 acted like it had a loose power connection, but inspection revealed nothing. Reading ronie-1's note led me to check the microswitch. Looked OK but ...