Question about Kenmore Washing Machines
...drain cycle This is an older Kenmore heavy duty 70 series washer. The load was too large or off center when the drain/spin cycle started. The machine began to bounce around so I stopped it. When the ...
...cycle, won't drain : DIY - Reddit https://www.reddit.com/.../washing_machine_stopped_mid_cycle_... RedditSep 3, 2014 - helpwashing machine stopped mid cycle, won't drain (self.DIY). submitted 1 ... I ...
...in rinse time or spin time, because all fully automatic washing machine, after washing cycle the drain pump or drain motor must be on, to remove water before start the next cycle. rinse or spin
Question about Washing Machines
Washer will not drain, it completes all cycles but will not finish the drain to spin cycle Model 11028872890 Does it stop at the drain cycle or does it keep draining and not advance to the spin cycle?
...drain part of cycle Thank you for the information so far regarding F 21 error code. I have Cleaned the drain pug twice thoroughly, removed the drain motor and cleaned it thoroughly and have detached ...
...in rinse time or spin time, because all fully automatic washing machine, after washing cycle the drain pump or drain motor must be on, to remove water before start the next cycle. rinse or spin
...in rinse time or spin time, because all fully automatic washing machine, after washing cycle the drain pump or drain motor must be on, to remove water before start the next cycle. rinse or spin
cycle starts, a lot of water comes out of the clothes, it stops, waits for the water to drain, then restarts. If the drain pump or drain lines are restricted or blocked or the pump is faulty, the unit
Question about Whirlpool Washing Machines
...drain after the rinse cycle. It still spun afterwards with water still in it. My washing machine will not drain. It finished all the cycles but didn't drain after the rinse cycle. It still spun ...
...drain cycle and it shows that the drain is not working at all. So make a test with the washer on in the drain cycle and test the voltage on the drain pump./valve, if voltage ispresetnthe drain ...
23 questions posted
Usually answered in minutes!
196 Questions
158 Questions
47 Questions
55 Questions
45 Questions