Amana ALW895 Top Load Washer "lwa50aw belt" Questions

...belt. This is an Amana LWA50AW open rear cover , see if belt slips. then remove belt and rotate empty drum if its jam than drum bearings need to change. if drum is free then belt might be loose and ...

...lwa50aw commercial quality washer, will not spin helix on spin pulley is clicking and jumping over the ramp or taper on the spin pulley in spin cycle, motor got hot and smelled burnt, still works on ...

...LWA50AW Most likely it could be the forward belt . When the machine is under load you hear a winding noise it sounds like the pulley belt tensioner. One other thing to check the rinse and hold button ...

belt on an Amana top load washing machine (model # LWA50AW). I cleaned the pullies but the small pully in the front is fixed and I don't know how to get the belt around it. It looks like I can install

LWA50AW doesn't spin This washing machine is 12 years old. Is it a belt drive or direct transmission for the agitator and spin cycle? If it's a belt drive what are the steps in replacing the belt? Ifi

belt i cant romove the pump for my amana lwa50aw I ended up breaking the pump. I found that there is no real trick, it just gets stuck on sometimes. I worked on removing it very carefully for a couple

...belt for Amana washer model #LWA50AW need basic instruction on how-to I just did this today. You have to remove the motor. first start by removing the two hoses then remove the four 1/2 inch bolts ...

...lwa50aw leaks on the spin cycles. As the drum starts to spin the water pushes up under the top lastic rim and comes up through the drain holes of the ''add chlorine'' tray and slops and spills down ...

...LWA50AW/PLWA50AW is agitating very slowly. I changed the belt, which was badly cracked all around with a few pieces missing. It still is agitating very slow. Everything else seems to be working ...