Question about Kenmore Washing Machines
tub spins excessively clockwise during agitating cycle causing clothes to wrap around the alternating rotating agitator. When the spin / drain cycle starts, wrapped clothes cause imbalance, then total
...ARE STILL WET are you sure that its spinning as this is a common problem with wet clothes. When the cycle is complete the clothes should be wrapped around the bottom of tub not just lying
Question about Simpson Washing Machines
...wraps the clothes tightly around the agitator or dumps them in one spot on the outer edge of the bowl. indicates failed tub support rods there is an air dampener at the bottom ends that hold the tub ...
Question about Frigidaire Washing Machines
...clothes end up wrapped around the agitator at the end of the wash cycle. We replaced the agitator but that has not solved the problem. My husband now thinks it is the transmmission which is a very ...
...clothes around the agitator will cause the load to be un balanced and then cause the "banging" noise... this should take care of the problem... The tub had springs on it to keep it balance. Take off ...
Question about Amana Washing Machines
...clothes around with water in the machine Could be a lot of different things. In the one time I had this experience it was a hot pad (that's made like a coil). It had slipped through between the drum ...
...clothes are getting tangled up with the agitator and wrapping around it. the machine then dumps the tub water on the floor. how do i fix this???? Check the water pump for hose connection that hose ...
...tub must be locked down or the clothes would wrap around the agitaor and knot up real bad. The motor turns in the oposite direction to spin and when it foes a cam riser in the main puley releases the ...
...clothes so hard they are wrapped around each other and stuck to the sides of the tub. My knit shirts come out so wrinkled that no matter what I do, line dry them or use the dryer, they never smooth ...
Question about GE Washing Machines
...tub so clothes wrapped around the agitator will have no effect on the spin other than a balance problem The hum and failure to start spinning may be attributed to a failed (failing ) start run ...
65 questions posted
Usually answered in minutes!
196 Questions
158 Questions
55 Questions
45 Questions
52 Questions