...water level of the machine The water level sensor is a pressure switch and there is setting to which as the water gathers into the TUB the pressure exerted on the diaprgram within the pressure switch ...
water level is too low.I want to get more water in it. Any suggestions? Is there any way i can override sensors so i can get about 5 gallons more water in it? YES YOU CAN RAISE THE WATER LEVEL ! Raise
...water to remain in the detergent dispenser. Check the washer for level with a good 3 foot or longer level and check across the front and back and then on each side and finally from each front corner ...
Question about LG WM Washing Machines
...Water level frequency (25~65) 5 timesInlet valve for main wash turns on. Water level frequency (25~65) 6 timesInlet valve for hot water turns on. Water level frequency (25~65) 7 timesInlet valve for ...
...water level switch set screw so it will stop filling at a higher setpoint rather than stopping at the edge of the gray cylinder baffels.You are aware the factory water level switch is pre set for low ...
...water level is very low. what should i do? the water level is very low. what should i do? Turn clockwise the water level switch under the top lid slightly. The machine will fill alittle higher than ...
...water level be during a normal cycle ? What about the rinse cycle ? Should the water spray out from the the front top (like in the demo video included on the CD with the washer) or is that just ...
...water level sensor, please check the hose that connected to water level sensor, make sure no dirt blocking or clogging the hose. also you can clean the tube under the pulsator, usually there is many ...
...: Correct water level (246) is not reached within 8 minutes after water is supplied or it does not reach the preset water level within 25 minutes Check to make sure the water valves are fully ...
161 questions posted
Usually answered in minutes!
1,845 Questions
401 Questions
243 Questions
245 Questions
234 Questions