...machine lid is down. So, of course you have it down, but sometimes the lid might have got a little bent or warped. So first try with lid down pushing down on lid while on spin cycle. If still wont ...
washer wont start it says lid Hi .. you ned to replace the lid switch. You could try pressing down on the lid and trying to start the unit.
Question about Whirlpool Cabrio Washing Machines
WONT DRAIN LID WILL LOCK LD WAS FLASHING WITH 20 MINS LEFT IN CYCLE ALL LIGHTS AROUND DIAL WERE FLASHING . TRIED TO PAUSE AND UNLOCK LID AND RESHUT IT HIT START NOTHING PUT ON DRAIN CYCLE NOTHING .LID
machine dislays Lu and Du error codes. It has stopped washing and lid wont open Some washer and dryers will clear the codes by unplugging the machine from the wall.... Leave it unplugged for 30 secs..
...LID WONT LOCK IT JUST CLICKS THEN STOPS AND WONT LOCK IS IT AN EASY FIX AND CAN I DO IT MY SELF?IM VERY MECHANICALLY INCLINED AND IT SOUNDS LIKE THE SENSOR IS BAD IS IT HARD TO REPLACE? The top has ...
Question about Whirlpool Cabrio Washing Machines
...wont reset to start again. Hi from retired Englishman in SW France, Suspect that stands for LiD. There is likely to be a problem with either the lid solenoid/lock or the 'lid closed' sensor ...
Question about Whirlpool Cabrio Washing Machines
...machine will fill and sit there. Mean while minutes will count down from 34 to 29 and sit there for about 15 minutes then suddenly switched from wash to spin cycle and gives an OL code. Resetting it ...
...machine, perhaps 3 nches in on either side and "pop" the clips holding down the lid, HOLDING the lid assy (cause its spring loaded nad sometimes glass) tilt he main top back, across the front wall of ...
...lid locked so you must pause the cylcle to do anything but it wont do anything even when resume is pushed.. tryed unpluging it nothing is happening Best off to call a certified Service Center such as ...
3,787 questions posted
Usually answered in minutes!
57 Questions
48 Questions
24 Questions
12 Questions