Whirlpool Cabrio WTW6600SBT Top Load Washer "slow agitator loading machine" Questions

After every spin cycle as the drum is slowing down, there is a low pitch grinding noise and the agitator stops spinning with drum. It happens during the last 5 seconds of the spin cycle. Any help? ...

agitator and disappear ? YES you would be surprised what can get under their and get between the basket and the outer tub. In working on these I have pulled out mesh shorts , small hand towels ect, If

...and really don't want to buy a new one if I don't have to.... Ok take a deeep breath and exhale slow. For both of you I believe it exists to be in the process of having a ccu failure. The part is ...

slow drain indication. How do I reset the washer? Hi Thanks for using FixYa. F 50 flashes when the motor rotor position sensor (RPS) senses no rotation (Motor Stalled). Does basket turn freely? If not

Agitator runs at a very slow pace. Good Evening: My washer's agitator rotates, however, at a very slow pace. If I have the normal load similar to those prior to the problem have occurred, the agitator

...slow my washing machine will fill but agitates very slowly it will empty and spin but when washing the agitates very little and very slowly I would check the agitator dogs, as they are called. More ...

...agitator and slows it down. Filled machine only half full and it still did it. Also machine keeps agitating even with lid open. machine is a whirlpool ultimate II. is the agitator broken are they ...

GE washer agitation starts normal the progressively slows and then stops agitation. All other modes work fine. Model # unknown. Motor or transmission? Thanx people!!! Model # located on the back of ...

...slow and the clothes won't move from top to bottom. check the dogs in the agitator take off the cap it should rachett if it turns free replace the dogs in the agitator The lower agitator might be ...

Agitator now moving VERY slow one way, making loud grinding noise Agitator started making a load grinding noise. Drain tub via spin. Could manually move agitator one direction. Tried again and made ...