Whirlpool Cabrio WTW6600SBT Top Load Washer "hit pause" Questions

...hit pause and then start only to have it reappear in a minute. I have also unplugged it for a shile ony t have i appear immediately upon starting a load. Any ideas other than waiting for Whirlpool to ...

what does F1 mean? I seem to have the same problem, where the F1 sign comes up. I guess, all I do is hit pause and re-start again and seems to work but I would wanna know what causes this as well.

PAUSE AND UNLOCK LID AND RESHUT IT HIT START NOTHING PUT ON DRAIN CYCLE NOTHING .LID LOCK LIGHTS UP ONCE IN AWHILE. try any button sequences yet . try holding start button and a cycle button hold both

pause button and hit start and it starts again no problem. What's up with that? f1 is the code for primary control failure cod be a bad connection at the primary control under the control console or a

...A LOAD OF WASH, WHEN CLOTHES WERE BARELY WET, CODE STARTED FLASHING AND WILL NOT CLEAR AFTER HITTING THE PAUSE/CANCEL BUTTON AND HITTING RE-START Washer was bought new last year, unsure of

hit pause/clear and then start - it usally begins its cylce then bumps back to F1. If I do this about 3-7 time it will clear. Then on rinse we go again. Some days I have a 3-F1 restart and somedays it

...hit pause cancel and have to start the machine on drain spin to finish the cycle This is your door lock mechanism that is either going out ot has gone out already. How old is your washer? We are a ...

...water valve? have the same the washer show F1 I have to hit pause start 3 time befor it will wash severly people have the same proble with this whirlpool washer it is a tiner proble i hve been

...hit the pause button, lift the whole top of the washer up, and then hit the start button, the cycle will continue normally. Once it is drained down and goes into the rinse cycle, I put the cover back ...

...hit pause and start 3 times, then it works. Then with 21 min left, I have to do it again. F1 means the central electrical control unit, i.e. the onboard computer, has fatally failed. Here is a link ...