...Ozone plate didn't look dirty but did have a dark spot where contact touches plate. Replaced plate with new plate. Still no ozone. Took plate back out and turned unit on as directed in manuel, ...
Question about Alpine Air Air Purifiers
...plate has no metal prongs.The Unit runs but no ozone spell like my other one........ I double checked the saftey switch works fine and fan works fine But,no ozone smell. Is there something else that ...
Question about Alpine Air Air Purifiers
...to work, i.e. more ozone being produced & blown into the room or less only calling on one plate to produce ozone. If you send me a close up pic of the control panel I may be able to tell you
Question about Eagle Advantage Air Purifiers
The ozone generator quit working. What is the problem and where can I get parts ? I have an Eagle 5000 & the ozone generator quit working, what usually is the problem ? You can pull off the rear ...
...ozone plate, I had my unit for 5 years and never replaced the ozone plate. Try that as I just ordered one from Ebay. try soaking the plate for a few minutes in ammonia ...it will bring these back to ...
...ozone smell. This generally indicates that the plate is cracked or not making proper contact. Pull the plate and look very closely as even a tiny microscopic crack anywhere on the plate will produce ...
...ozone plate. Unplug the unit and remove the rear air filter. Clean the filter with clean water and allow to COMPLETELY air dry. Removed the glass plate by depressing the lever behind the glass plate, ...
...plate in ammonia that is the smell that produce the ozone plates, that is normal,in all the devices purifiers that works with ozone plates, do not worry about that , that is crispy pure air. a
No Ozone Hi! I have a Living Air model 880 and a model XL15 and neither produces ozone. The plates and fans are both good. Thanks Mine has a switch lower right hand side that will stop the ozone. HI,I
...ozone 1) Set the switch to manual rather than auto and always run it on manual. 2) Remove the back of the machine and remove the 4" white plates. Check them for cracks, breaks in the mesh, loose ...
230 questions posted
Usually answered in minutes!
271 Questions
95 Questions
97 Questions
37 Questions
7 Questions