RCA HD56W66 56" HDTV "old tv adjust screen" Questions

...tv up. Its new to me (about 5 years old). Right now its only running through a Tivo which is on rabbit ears. I have it plugged into TV with standard red/white/yellow cable. Any ideas. mystic100 ...

old Phillips big screen TV. Serial# 72630137 Model# 60P8342A. No remote the p.o. tire has too much red. How do I adjust my picture. GAIL,YOU NEED THE REMOTE THAT CAME WITH YOUR TV IT WILL ALLOW YOU TO

...old Toshiba Tube TV. The screen become squeeze in the middle part. There are no screen picture adjusting screw or control for adjustment. Can it be fix? Thanks for help Try unplugging TV while it is ...

...tv is 10 yr old ser3 935351541- ihave tried color adj etc Rca Screen ControlThese sets have screen control adjustment usually located behind the speaker grill(pops off -velcro or press tabs) and ...

...old projection tv, some tecnical ajust parameters have reset, so if you can adjust,this settings on service menu on tv, or ask for help on local repair store, to calibrate scren. Hi, Its common ...

TV about 4 years old. It has worked fine until today when the centre of the screen around 50% of the screen from top to bottom has colloured shadows on it. I have tried to adjust the convergence which

old. TV just started to take longer to come on. Picture is dark, lacking clarity and fades, gets darker towards outside of screen. At one point lost picture and sound, waited ten minutes, turned TV on

...old style TV , 6years old. Screen looking pinkish. All whites show as pink, as if one of the 3 colours is missing. the rgb board is faulty I would suggest to adjust the tint to about 50% first. If ...

...tv is 25 years old. Screen went red. Adjusted all the tint, contrast and other buttons. No change [email protected] Color wheel controls the color. try replacing then reindexing the color wheel. ...

TV is only 3 months old. It's a WD73737 73 inch First the tv cannot be only 3 months old, (needs chassis rebuilt- send to mitsubishi they do it for around $300) and how did we go from DLP to adjusting