RCA R52WH73 Projection Television "fl231 fuse tips tricks" Questions

...words and doubled vision picture this sounds like the common fl231 i sugguest you read the fl231 fuse problem under the tips and tricks section of this website. this is a simple very inexpensive ...

...AT ALL. WHAT IS WRONG? From the symptoms you describe. you have the fl231 fuse problem. Congrations this is a simple fix. please read my article "the fl231 fuse problem" in the tips and tricks ...

fuse fl231. We have a RCA R52WH74. possible blown fuse. we just need to know what area of board to find ***. consult the Article in the tips and tricks section "the fl231 problem"....it give

...fuse? I think calling a techinician will be too costly.. Thanks! if this is the fl231 problem look under my profile under tips and tricks section. there is a detailed instruction on how to repair the ...

fl231 fuse. How do i know that this is what i need to do? i found the fuse, but it looks fine. it is connected to the board, and the rubber cap over the fuse is not broken or cracked. What should I do

...fl231 fuse problem. consult the fl231 problem article under the tips and tricks section. this is probaly the simplest most inpensive repair on this set You have to repair the cold solder connections ...

fuse from the circuit board? the fl231 problem requires a soldering iron. to remove it from the circit board. I would not recomend this for someone who has never soldered before. and consult the fl231

...fuse, but I have a RCA r52wh77 is the fix the same? yes that model is the same itc222 chasis... the fl231 problem is common on all itc222's even more so on that model .. consult the tips and tricks ...

fl231 fuse is blown. my question is has anyone fixed the problem by just replaceing the fuse or is it more likely another problem causing the fuse to blow? has anyone experiencing this have a solution

...fl231 fuse problem. if you do read the fl231 fuse problem in the tips and trick section of this website http://www.fixya.com/support/r1062030-fl231_problem_convergence_not_in this is a common problem ...