Ricoh 3310LE Plain Paper Laser Fax "reset tray" Questions

...tray, and unplug canon. Leave it this way overnight, and in the morning, reinsert the paper tray, and plug back it. This should effectively reset the machine, and clear that error. It worked for

...like a trash can or boxes stored under the trays. to fix must remove the rear of the finisher reset the elevation drive assy. Be careful don't let the trays fall down tech would be good on this ...

How do i reset fuser during life? tray error check tray sensor

...reset the sensors. If there was no paper the first time check the paper tray by pulling out and then look inside where the tray sits as the poaper might be stuck there.. also check the tray in that ...

Canon 710i Machine gets false paper jam errors. Open and Close the top cover Resets error. Sensors,Feed rollars OK Can you look into the paper tray and actually see if the feed rolls are turning? You ...

reset and then its ok,but we then lose all memory1 is the tray going up when you put the paper in and close it? is the sensor there? there has to be a lever that is free floating in the tray, when you

...Reset button for it to reconize you have loaded paper. The Paper tray has a sensor for the same. Open and service the sensor and that will solve ur problem. put the lever of paper loading tray of and ...

...tray no matter what function I am requesting (i.e. printing a function report, copying a document, receiving a fax...). I have reset it, switched out the paper, put in a new ink cartridge, everything ...

...tried delete and clear buttons E000 means your fuser section is having problems.sometimes you can reset but may need to replace fuser unit. How do you reset fuser

reset the code again and then close each drawer one at a time waiting 15 seconds between each tray closing. If you close a drawer and it pops the code after a few seconds then that is the tray that is