Singer 3116 Simple "trying sew keeps jamming" Questions

...jamming every time i try to sew just found this on the internet... Fabric jamming in your machine may be caused by the feed dogs. The feed dogs are those tiny teeth along the sewing machineunderneath ...

...keeps jamming. how do i make it so it wont get jammed? Hello, Give these solutions a try. * Un-thread your machine and remove your bobbin. Clean any loose thread or lint out of your bobbin case. ...

...sew. It keeps showing c4 but I check and it's fine. Can you help? try rethreading the machine top and bobbin try turning the bobbin the opposite direction clean under the needle plate and in ...

...jamming when you try to sew in reverse, it may be due to a few issues: Thread tension: Make sure your thread tension is not too tight, which can cause the thread to bunch up and jam the machine. Try ...

...keeps getting jammed every time i go to sew the whole thing gets jammed and all tangled underneath where the bobbin is try changing the needle--make sure it's the correct one for the fabric being ...

Jammed spool pin on a Brother CE5000 PRW sewing machine I have a brother ce5000prw sewing machine and I think the spool pin is jammed- I can't pull it up to keep the thread on it. Can someone PLEASE ...

...keeps getting tangled in with the bobbin thread and jamming up the machine. Hello, Here are a couple of things to try. * Un-thread your machine and remove your bobbin. Clean any loose thread or lint ...

keeps jamming, appears the needle keeps jamming under the plate,please help. It sews a couple of stitched then jams up, I re thred the Cotten and try again it again does a couple of stitches then jams

jamming when trying to hem Why do Satin Fabrics keep jamming when trying to hem them? Also have the smae problem when trying to do shirring! Satin is a slippery fabric besides being thin, this is when

get my machine to stop jamming suddenly has stopped sewing and it keeps jamming Have you tried oiling all moving parts. Go under presser foot under bobbin and remove all lint. Try to change the needle