...however plays ok on my Phillips dvd player.What am I doing wrong? thanks Check formatted disc see if it's +R,-R and see if Toshiba will play homemade disk or just disc recorded in different
...Phillips, and Imation discs] See if changing recording speed would help. As far as I know the discs should work. Try the discs that you have burned before on another player just to check if there is ...
...disc (DVD) it shows 'Wrong region code' and does not proceed from thr. What should i do? ...
wrong region Change your region to multi-region so it can play discs from any region but please check the instruction manual to ensure that changing the region does not void the manufacturers warranty
...lens is out of alignment, or the discs your using are the wrong type. You need to use a SOLID SPEED DISC. Yes:Dvd-r x4, x8. Dvd-rw x4, 8x. DONT use up to 16, 1-16x or antyhing with UP TO or 1-8x, ...
...disc" Whats wrong? When you get No Disc, it normally occurs for one of two reasons. Either dust has built up on the lens of the laser mechanism, or the operating voltage of the laser has drifted off ...
...WRONG WITH DISC'S Hello, The majority of problems dealing with a dvd player not being able to read discs are because the discs are either dirty or have small scratches on them and the other common ...
wrong when copying them onto disc....we have turned the machine off at the mains for 2 hours but it still will not work! thanks for any advice you may have. No you haven't done anything wrong this
...wrong region" for most of their dvds. It is 2nd hand and didnt come with any instructions. Open the disc tray Press SETUP Go to "Preferences" Press OK Press 212225 Press LEFT, DOWN Enter region ...
wrong choice and then the screen went dark and started rolling. I can't even read it now. Hi You switched to PAL mode from NTSC or vice versa. Most DVDs will only output PAL or NTSC, not both. So even
531 questions posted
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions
