Brother MFC-8220 Fax "drum cleaning" Questions

...Drum tried cleaning corona by moving blue thingami and error still persists. try using canned air to clean the coruna chagre wire assy "Dust on drum" is common when the drum has failed. If the corona ...

drum unit which has a corona wire which occasionally may need cleaning by running a wand across it. there should be a colored clip that will slide back and forth on the drum catridge to clean it.sorry

Drum error My Brother MFC 7220 says "drum error" and that I should clean the corona wire. When I do clean the corona wire, I still cannot print and the error does not go away. Do I need to buy a new ...

...to check the cleaning blade and toner roller remove the drum cartridge. Drum could flipped the cleaning blade toner roller could have jammed or motor bad great jam. worst case control board

...then replace developer material with fresh devo, then run AT (auto toner) Also, would recomend cleaning out Drum Cleaning Unit, otherwise the drum will be scratched from devo against drum

Dust on the drum message - fax 2820 brother I got a message to clean the corona wire of the drum ( dust on the drum). Where it is and how to clean it up.Thanks,Samir There is a blue colored slider on ...

Cleaned the drum by running the slider on Brother IntelliFax 2800 Before I cleaned the drum the copies were basically fine with a couple of spots on the page here and there. Now the copies are black ...

Getting the message clean drum. Clean corona wire of drum unit. Need instructions on how to clean unit. What parts to I need? You do not need any parts, just do the following.1. open the front toner ...

...do i need to clean with what product when people send me a fax on my 190 i caqnt read it does the drum have to be cleaned and do you use alcohol thanks mitch I assume you talking about a panasonic ...

...have cleaned the glass and tried cleaning the drum wire with the blue tab any other suggestions? Sometimes the drum cleaning blade craps out. Remove cartridge and inspect the drum, it should be